久久久久亚洲精品男人的天堂,日本韩国男男作爱GAYWWW,特黄AAAAAAA片免费视频,av天堂电影网

成都善榮機電設備有限公司
中級會員 | 第9年

17302157802

當前位置:成都善榮機電設備有限公司>>日本SMC>>SMC氣缸>> MHZ2-25D日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性

參  考  價面議
具體成交價以合同協議為準

產品型號MHZ2-25D

品       牌SMC/日本

廠商性質經銷商

所  在  地成都市

更新時間:2025-04-25 18:46:25瀏覽次數:2563次

聯系我時,請告知來自 化工儀器網
標準行程 -mm 電動機功率 -kW
動作方式 其他 缸徑 -mm
接管口徑 -mm 接管螺紋 -
理論作用力 -N 氣缸數 -
適用壓力 - 速度范圍 -
外形尺寸 -mm 溫度范圍 -
重量 -kg,-kg 重量 -kg,-kg
最大負荷 -N 最大力距 -Nm
最大行程 -mm
日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性
適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
氣源切斷時落下防止用的鎖緊氣缸內置,帶導桿的薄型氣缸。(單向鎖緊)
把制動機構緊湊內置在滑臺內。
能進行中間停止
 Construct so that the human body will not come into direct contact with driven objects or

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性


適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
氣源切斷時落下防止用的鎖緊氣缸內置,帶導桿的薄型氣缸。(單向鎖緊)
把制動機構緊湊內置在滑臺內。
能進行中間停止
 Construct so that the human body will not come into direct contact with driven objects or the moving parts of locking cylinders.   
If there is a risk of contact, provide safety measures such as a cover or a system that uses sensors that will activate an emergency stop before contact is made.
2. Use a balance circuit in which lurching of the piston is taken into consideration.
but only after a time lag. This lag determines the amount of the overrun of the piston stroke.
there are constraints in terms of the allowable kinetic energy that can be applied to the cylinder in a locked state.
Therefore, refer to the allowable kinetic energy of the respective series. Furthermore, during locking,
the mechanism must sustain the thrust of the cylinder itself, in addition to absorbing the kinetic energy.
 Therefore, even within a given allowable kinetic energy level, there is an upper limit to the amount of the load that can be sustained.
• Fine lock series (Series CLJ2/CLM2/ CLG1) Maximum load at horizontal mounting:
Thus, the range of the maximum and minimum amounts of the overrun is the stopping precision.
• Place the limit switch before the desired stopping position, only in the amount of the overrun.
• The limit switch must have a detection length (dog length) of the overrun amount + α.
• For SMC’s auto switches, the operating range are between 8 and 14 mm. (It varies depending on a switch model.)
When the overrun amount exceeds this range, self-holding of the contact should be performed at the switch load side.
∗  For stopping accuracy, refer to Series CLJ (P. 603), Series CLM2 (P. 614), Series CLG1 (P. 627), and Series CL1 (P. 637) respectively.
內置鎖機構的氣缸與導桿緊湊的體化,直線移動單元。(雙向鎖緊)
70% or less of the holding force (Maximum static load) for spring lock Maximum load at vertical mounting: 35% or less of the holding force
 (Maximum static load) for spring lock • Lock-up series (Series CL1) Maximum load at horizontal mounting: 50% or less of the holding force
(Maximum static load) Maximum load at vertical mounting: 25% or less of the holding force (Maximum static load) 3.In a locked state, do not apply impacts,
strong vibrations or rotational forces.   
Do not apply a impacts, strong vibrations or rotational forces from external sources,
because this could damage or shorten the life of the lock unit. 4.The locking of the fine lock cylinder is directional.    

日本SMC鎖緊氣缸簡介,SMC鎖緊氣缸功能特性
Although the fine lock cylinder can be locked in both directions, be aware that its holding force is smaller in one of the directions.   
帶磁性開關(CDLQ系列:CDLQ)
氣源切斷時落下防止用的鎖緊氣缸。
氣緩沖結構和鎖緊單元內置于薄型氣缸中。(單向鎖緊)
帶磁性開關(RDLQ系列:RDLQ)
If the lock is applied at a desired position of a stroke and compressed air is applied to only one side of the cylinder,
the piston will lurch at a high speed the moment the lock is disengaged. In such a situation, there is a risk of injury to humans,
or equipment damage. To prevent the piston from lurching, use a balance circuit such as the recommended pneumatic circuit (P. 598).
 If an air-hydro fine lock cylinder is used, make sure to operate the lock portion through air pressure.
 Never use oil on the lock-up cylinder because the lock-up cylinder is a non-lube style. Failure to observe this could cause the lock to malfunction.
Refer to the following criteria for the maximum load in the locked state, and set.
帶磁性開關(CDNG系列:CDNG)
適合中間停止及急停?落下防止用的鎖緊氣缸。(雙向鎖緊)
帶磁性開關(CDLS系列:CDLS)
氣源切斷時落下防止用的鎖緊氣缸。(單向鎖緊)
the maximum load must be set as described below. 1. For constant static loads, such as for drop prevention:
• Fine lock series (Series CLJ2/CLM2/ CLG1) 35% or less of the holding force (maximum static load) Note)
For applications such as drop prevention, consider situations in which the air source is shut off,
 and make selections based on the holding force of the spring locked state. Do not use the pneumatic lock for drop prevention purposes.
 • Lock-up series (Series CL1) 50% or less of the holding force (maximum static load)
2. When kinetic energy acts upon the cylinder, such as when effecting an intermediate stop,
適合中間停止、急停、落下防止用的鎖緊氣缸。(雙向鎖緊)
帶磁性開關(CDL□系列:CDLJ2、CDLM2、CDLG1、CDL1)
When a cylinder is in a no-load and locked state, the holding force (maximum static load) is the lock’s ability to hold a static load
that does not involve vibrations or shocks. To ensure braking force, 
CLJ2/CLM2/CLG1···· Holding force at piston rod extended side decreases approx. 15%. 5.The locking of the lock-up cylinder is unidirectional.  
 Because the locking direction of the lock-up cylinder is unidirectional, select the locking direction in accordance with the particular operating conditions. I
t is also possible to manufacture a bidirectional lock-up cylinder. For details, refer to “Made to Order” on page 1989. Due to the nature of its construction,
 a lock-up cylinder has a play of approximay 0.5 mm to 1 mm in the axial direction. Therefore,
if an external stopper is used to stop the piston rod and the lock is engaged, the piston rod will shift in the amount of its axial play.
6.To effect an intermediate stop, take the cylinder’s stopping precision and overrun amount into consideration.   
Because the lock is applied by mechanical means, the piston will not stop immediay in response to a stopping signal,

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

X
該信息已收藏!
標簽:
保存成功

(空格分隔,最多3個,單個標簽最多10個字符)

常用:

提示

X
您的留言已提交成功!我們將在第一時間回復您~
撥打電話
在線留言
国产精品tv992在线观看| 久久中文字幕人妻丝袜| 亚洲性爱视频| 亚洲日韩一区精品射精| 久久精品国产亚洲av孟若羽| 国产日韩欧美国产欧美日韩| 久久人人爽人人人人爽AV| 品酒要在成为夫妻后| 亚洲国产天堂久久精品网| 亚洲aa男人的天堂| CHINESE性内射高清国产| 国产亚洲AV片在线观看18女人| 日韩在线欧美在线国产在线| 精品人妻一区二区三区四区在线| 国产亚洲精品97| 欧美在线精品一区二区在线观看| 在线播放三级黄色日韩av| 亚洲欧美日韩精品久久亚洲区| 漂亮人妻被黑人久久精品| 门卫老李干了校花高小柔| 国产自国产自愉自愉24区| 国产日韩一区| 欧美乱大交| 又色又爽又黄18禁美女裸身无遮挡| 韩国年轻的妈妈1| 校花的凌羞辱日记高H女女| SM调教贱屁股眼哭叫求饶H| 日本三区四区免费高清不卡| 国产精品99久久久久久AV色戒| 欧美日在线观看| 99re热视频这里只精品| 亚洲精品国产精品乱码不99| 91午夜精品亚洲一区二区三区| 抖音无限次短视频老司机| 国产欧美一区二区三区在线看| 欧美伊人久久综合成人网| 国产欧美精品区一区二区三区| 极品人妻VIDEOSSS人妻| 娇妻玩4P被三个男人伺候电影| 色一情一区二区三区四区| 亚洲熟妇熟女久久精品综合|